<?xml version="1.0" encoding="UTF-8"?><metadata>
    <idinfo>
        <citation>
            <citeinfo>
                <origin>Schwarz, G.E. and Alexander, R.B.</origin>
                <pubdate>19950901</pubdate>
                <title>Statsgo Soil Characteristics Version 1</title>
                <edition>1.1</edition>
                <geoform Sync="TRUE">vector digital data</geoform>
                <pubinfo>
                    <pubplace>Reston, VA</pubplace>
                    <publish>U.S. Geological Survey</publish>
                </pubinfo>
                <onlink>withheld</onlink>
                <ftname Sync="FALSE">Statsgo_new</ftname>
                <onlink>http://soils.usda.gov/survey/geography/statsgo/description.html</onlink>
                <onlink>http://datagateway.nrcs.usda.gov/</onlink>
            </citeinfo>
        </citation>
        <descript>
            <abstract>Statsgo was created from the Nationwide USSOILS and imported into SDE by USGS 4th Field HUC for TMDL projects. The following is a summary of the Master Nationwide dataset used for hydrological analysis. USSOILS is an Arc 7.0 coverage containing hydrology-relevant information for 10,498 map units covering the entire conterminous United States. The coverage was compiled from individual State coverages contained in the October 1994 State Soil Geographic (STATSGO) Data Base produced on CD-ROM. The geo-dataset USSOILS.PAT relates (on the basis of a map unit identifier) the 10,498 map units to 78,518 polygons. The scale of the geo-dataset is 1:250,000. The INFO attribute table USSOILS.MUID_ATTS contains selected variables from the STATSGO data set for 10,501 map units (an extra 3 map units are contained in the attribute table that are not in the geo-dataset - see the 'Procedures' section below), including: the map unit identifier, a 2-character state abbreviation, available water capacity of the soil, percent clay in the soil, the actual k-factor used in the water erosion component of the universal soil loss equation, the organic material in soil, soil permeability, cumulative thickness of all soil layers, hydrologic characteristics of the soil, quality of drainage, surface slope, liquid limit of the soil, share of a map unit having hydric soils, and the annual frequency of flooding. To facilitate mapping the attribute data, the narrative section below contains instructions for transferring the information contained in the attribute table USSOILS.MUID_ATTS to the polygon attribute table USSOILS.PAT. STATSGO United States Soil Water Capacity Clay Organic material Permeability Infiltration Drainage Hydric Flood frequency Slope</abstract>
            <purpose>The USSOILS coverage was originally compiled to support a national model
of water quality.  The model uses the soil characteristics contained in
this coverage to mediate deliveries of nonpoint source pollution to
stream and river segments in the RF1 data base. The National Resource
Conservation Service (NRCS) recommends that any maps using NRCS STATSGO
data show the source and date, and provide the following statement:

"STATSGO is designed to support regional, multistate, State, and river
basin resource planning, management and monitoring."</purpose>
            <supplinf>
Procedures_Used:
The individual State coverages are from the State Soil Geographic
(STATSGO) CD-ROM data base, issued by U.S. Department of Agriculture,
NRCS National Cartography and GIS Center, P.O. Box 6567, Fort Worth,
Texas 76115-0567, 1-800-672-5559 (U.S. Department of Agriculture, 1991).
The CD-ROM coverage for New Mexico was defective and was not used.  A
corrected copy of the New Mexico coverage was obtained from Norman Bliss
of the EROS Data Center ((605) 594-6034).  The STATSGO State-based
coverages were merged together into a national coverage using the Arc
MAPJOIN command.  All nodes along merged boundaries were checked and
edited to remove any superfluous nodes created during the mapjoin
process, and to ensure arcs properly merged along and across State
boundaries.  The joining process preserved all State boundaries.

To understand the procedures used to create the attribute table
USSOILS.MUID_ATTS, it helps to have an understanding of the STATSGO data
structure.  The smallest spatial entity mapped within the STATSGO
dataset is called a map unit, of which there are 10,498 broken out into
78,518 polygons within the conterminous United States.  Each map unit
consists of up to 21 components.  Components are used to apportion
different characteristics of a map unit and do not represent a separate
spatial entity.  To help understand this, consider a map unit that has
only two components.  Suppose 30 percent of this map unit contains soil
of type A and the remaining 70 percent contains soil of type B.  Thus,
component 1 of the map unit would have soil type A and component 2 would
have soil type B.  The data base would record the soil type for each
component, along with the percentage of the map unit represented by each
component (in this example, 30 percent for component 1 and 70 percent
for component 2).  The specific locations of soil types A and B are not
spatially defined in the data base.

Each component is further delineated into a maximum of 6 layers,
corresponding to distinct soil layers.  Soil characteristics recorded
for a layer typically consist of a high and low value, which describes a
range for that characteristic within that layer.  Included among the
characteristics of the soil layer is the thickness of the layer.

In developing the USSOILS.MUID_ATTS table, it is necessary to aggregate
the layer and component information up to the level of a map unit.  To
aggregate layer information to the component level, we first construct a
simple average of the high and low values of a characteristic for each
layer.  We then construct a weighted average across all layers of the
layer-specific characteristic averages, the weights being the thickness
of the layer relative to the total thickness of all layers.  For
component-level information that is expressed as a range, we construct a
simple average of the high and low values defining the range. These
steps reduce layer-specific information and ranges of component-specific
information into a single datum of component-specific information for
each characteristic in the data base.  Finally, to obtain map unit
information, we construct a weighted average across all components of
the component-specific information, the weights being the component
percentages given for the map unit.

Included in the Notes section below are the computer programs used to
construct the USSOILS.MUID_ATTS data base, along with an AML program for
transferring this information to the polygon attribute table
USSOILS.PAT. We ask the reader to refer to the documentation contained
in these programs to obtain detailed information on the methods used to
construct each data item.  The following is a brief description of how
the programs were used.

The AMLs "layer_out.aml" and "comp_out.aml" were run using the UNIX
batch program "batch.prog" to write data from the STATSGO State INFO
layer and comp files into ascii files.  The ascii files were read by the
SAS program "setussoils.sas" to aggregate data from the layer and
component level to the map unit level.  If there is no information
available to determine a characteristic's value in a given map unit, the
characteristic is given the value -0.1 to indicate a missing value.  The
program "setussoils.sas" creates an ascii, comma-delimited file and a
SAS file of the aggregated, map unit data containing information for
10,470 map units.  The comma-delimited, ascii file is then read back
into ARC/INFO using the aml "ussoils_muid_atts.aml" to create the
attribute table USSOILS.MUID_ATTS.  Note that there is a discrepancy
between the number of map units contained in the combined COMP and LAYER
files (10,470) and the number contained in the polygon attribute table
(PAT) USSOILS.PAT (10,498 broken out into 78,518 polygons).  The
discrepancy arises because 3 map units in the COMP and LAYER files were
not included in the PAT (these are - VT029, UTWA1 (not in LAYER file
either), and NE165 (not in LAYER file either)), while 31 map units in
the PAT coverage were not in the COMP or LAYER files.  The 31 map units
missing from the COMP and LAYER files are all "water" designated map
units for which the values of all items are missing.  To assure that the
attribute table is complete, the program 'ussoils_muid_atts.aml' appends
the missing MUIDs from USSOILS.PAT to USSOILS.MUID_ATTS and sets the
attribute values (except for STATE) to missing.  Thus, the total number
of map units contained in USSOILS.MUID_ATTS is 10,501 (10,470 + 31).  We
made no attempts to correct the USSOILS.PAT file for the 3 missing map
units contained in the COMP and LAYER files and in the attribute table
USSOILS.MUID_ATTS.

To assist the user in mapping the attribute information, we include the
program 'ussoils_atts.aml' in the "Notes" section.  This program relates
the attribute information for the 10,498 "mapped" map units (10,501 - 3)
to the 78,518 polygons contained in the polygon attribute table
USSOILS.PAT.  This program may be run as an AML from the command line in
ARC by entering the command: &amp;r ussoils_atts.

Revisions:
1.0  Original Version
1.1  Changed the documentation and coverages in accordance with
comments received from reviewers.  Created the INFO file
USSOILS.MUID_ATTS containing the attribute information for
10,501 map units.  Deleted this information from the polygon
attribute table USSOILS.PAT.  Changed the programs and
documentation to reflect this change in file structure.

Reviews_Applied_to_Data:
Summary of review by Ken Lanfear, Network Info Products Coordinator,
Reston, VA, August 21, 1995.

Ken reviewed the metadata for the State Soil Geographic (STATSGO) Data
Base for the Conterminous United States, and the associated coverage,
ussoils.

He viewed the coverage on a computer screen to ensure arcs were present
for the 48 conterminous States and the District of Columbia (included in
Maryland). He selected several States by Mapping Unit ID (MUID) and
plotted polygons to check that the states were complete and that mapping
units plotted in the correct state. He also examined the polygon
attribute table, USSOILS.PAT, to note record counts and verify the
format. He spot checked one mapping unit (TX118) against the original
data (which was on line) and verified that the HYGRP and DRAIN items
were computed correctly.

He read the procedures included under supplementary information, and
concurs with the overall processing steps. However, time did not permit
him to check details of the coding.

Ken found one possible discrepancy: There are 10,499 (actually 10,498 if
we exclude the null map unit consisting of the "outer" polygon to the
coverage) unique MUID's in the USSOILS.PAT file, but only 10,470 in the
SOIL_ATTS file. He inquired where the 29 extra units came from?

Ken emphasized that the narrative portion should be modified to make it
clear that each mapping unit can be comprised of several polygons. This
caused him some confusion initially.

Ken had a suggestion for reducing the size of the coverage.  Instead of
appending all the items of SOIL_ATTS to USSOILS.PAT, why not just rename
SOIL_ATTS to USSOILS.SOIL_ATTS ? This file would export with the
coverage. By copying to the .PAT, the values are repeated an average of
about 7.8 times. However, since the current form of ussoils is large but
workable, he made this suggestion optional.

Summary of review by Barb Ruddy, Hydrologist, Lakewood, CO, August 31,
1995.

Barb looked at the programs to make sure they made sense.  She found the
programs to be well documented and the procedures to be appropriate for
aggregating the comp and layer information to a single map unit value.
She checked the values for the variable hygrp and found they were
comparable to the analysis that she and Bill Battaglin had done.  She
also looked at how the data plotted nationally and it checked.

Barb's main concern was the inefficient storage of the attribute
information. Because each map unit is repeated multiple times in the PAT
file, she suggested that the attribute data could be more efficiently
stored in an info file.

Related_Spatial_and_Tabular_Data_Sets:
None

Other_References_Cited:
U.S. Department of Agriculture, National Resource Conservation Service,
National Soil Survey Center, 1991, "State Soil Geographic (STATSGO) Data
Base:  Data use information," Miscellaneous Publication Number 1492, 110
p. (Revised July 1994.)

Notes:
The AMLs and SAS programs used to create USSOILS.MUID_ATTS and to
transfer the attribute information to the polygon attribute table
USSOILS.PAT are given below.  Please refer to the documentation
contained in these programs for information on variable descriptions,
and computation methods.

1.  The AML "layer_out.aml" used to unload selected items from the
individual STATSGO State layer files into a single ascii data set.

/*----------------------------------------------------------------------
/*
/*  Command name: LAYER_OUT.AML
/*  Language: AML
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* Purpose:  Program outputs soil LAYER data for processing in SAS.
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* Comments:
/* 1. Item description:
/*   LAYDEPH,LAYDEPL = layer depth high,low values
/*   AWC = available water capacity (inches/inch)
/*   CLAY = clay content of soil (% of soil &lt; 2mm in size)
/*   KFFACT = soil erodibility f-factor
/*   OM = organic matter content (% by weight)
/*   PERM = permeability rates (inches/hour)
/*   LL = liquid limit of the soil (%moisture by weight)
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* History:
/*     Author/Site,                Date,        Event
/*     ------------------------------------------------------------
/*    R. Alexander/G. Schwarz    04/18/95    CREATED
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
&amp;sv STATEUP := [TRANSLATE [response 'ENTER STATE']]
&amp;DATA arc info
ARC
/*
CALC $NM = 1
CALC $COMMA-SWITCH = -1
CALC $PRINTER-SIZE = 200
/*======================================================================
/*
SEL LAYER
OUTPUT /srv3/bsa/gschwarz/statsgo/LAYER.%STATEUP% INIT
PRINT MUID,SEQNUM,LAYDEPH,LAYDEPL,AWCH,~
AWCL,CLAYH,CLAYL,KFFACT,OMH,OML,~
PERMH,PERML,LLH,LLL
/*
Q STOP
&amp;END
&amp;RETURN

2.  The AML "comp_out.aml" used to unload selected items from the
individual STATSGO State component files into a single ascii
data set.

/*----------------------------------------------------------------------
/*
/*  Command name: COMP_OUT.AML
/*  Language: AML
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* Purpose:  Program outputs soil COMP data for processing in SAS.
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* Comments:
/* 1.  Output data are averages of high and low values
/*
/* 2.  Item description:
/*       MUID = Mapunit identifier
/*       SEQNUM = component identifier
/*       COMPNAME = Name of the component
/*       COMPKIND = Description of the kind of component
/*       COMPPCT = Percent of mapunit represented by component
/*       DRAINAGE = Drainage quality (1=well drained to 7=poorly drained)
/*       HYDGRP = soil index variables (1=well drained to 4=poorly drained)
/*       HYDRIC = hydric soil indicator (1 if hydric)
/*       ANFLOOD = Annual flood frequency (1 = frequent (&gt;50% chance)
/*                 2 = occasional (5-50% chance), 3 = rare (&lt;5% chance))
/*       SLOPE = Slope of surface (percent)
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* History:
/*     Author/Site,                Date,        Event
/*     ------------------------------------------------------------
/*    R. Alexander/G. Schwarz    04/18/95    CREATED
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
&amp;sv STATEUP := [TRANSLATE [response 'ENTER STATE']]
/*
&amp;DATA arc info
ARC
/*
CALC $NM = 1
CALC $COMMA-SWITCH = -1
CALC $PRINTER-SIZE = 200
/*======================================================================
/*
SEL COMP
CALC SLOPE = ( SLOPEL + SLOPEH ) / 2
/*
OUTPUT /srv3/bsa/gschwarz/statsgo/COMP.%STATEUP% INIT
PRINT MUID,SEQNUM,COMPNAME,COMPKIND,~
COMPPCT,DRAINAGE,HYDGRP,HYDRIC,~
SLOPE,ANFLOOD
/*
Q STOP
&amp;END
&amp;RETURN

3.  The program "batch.prog" is used to run the AML's "layer_out.aml" and
"comp_out.aml" to create individual layer and comp files for each state.
The resulting state files will be read by the SAS program
"setussoils.sas."

#./bin/ksh
#################################################################
#   PROGRAM : BATCH.PROG                                        #
#   DATE    : 04/18/95                                          #
#   PURPOSE : THIS PROGRAM PROCESSES STATSGO AML OUTPUT PROGRAMS#
#             FOR EACH OF THE STATES.                           #
#             THE PROGRAM CHANGES THE READ/WRITE ATTRIBUTES OF  #
#             THE STATSGO STATE DIRECTORIES AND                 #
#             DIRECTS THE LOOP VALUES TO THE AML                #
#################################################################

for state in al ar az ca co ct de fl ga ia id il in ks ky la ma md me mi \
mn mo ms mt nc nd ne nh nj nm nv ny oh ok or pa ri sc sd tn tx ut va vt \
wa wi wv wy; do
#chmod 755 /srv3/bsa/gschwarz/statsgo/data/$state/spatial/info/*
#chmod 755 /srv3/bsa/gschwarz/statsgo/data/$state/spatial/$state/*
cd /srv3/bsa/gschwarz/statsgo/data/$state/spatial
/gis2/esri70/arcexe70/programs/arc&lt;&lt;-::::
&amp;r /srv3/bsa/gschwarz/statsgo/layer_out
$state
&amp;r /srv3/bsa/gschwarz/statsgo/comp_out
$state
q
::::
done

4.  The SAS program "setussoils.sas" used to read the ascii files created by
"layer_out.aml" and "comp_out.aml", perform averages of the data, merge
the information from the layer file into the component file, and aggregate
the component level information into a file having mapunit as the unit of
observation.  The resulting "map unit" file is output as both an ascii,
comma-delimited file and a SAS file.

/*  Program to read the conterminous state statsgo ascii info files,
comp.state and layer.state, and calculate summary statistics by muid.
The program prints an ascii file which is then passed back to info in
a latter step.

Program written by Greg Schwarz, 4/24/95.

The program uses the SAS macro language to perform iterative appends
to the main database.  Two database files are created, an ascii file
ussoils.dat containing comma-delimited data, and a SAS dataset,
ussoils.ssd.  To iteratively build the files, we use the mod option
of the file statement for the ascii file, and proc append for the SAS
file.

The program reads in the layer.state file (where state refers to the
state name and is updated as the program iterates through the do loop.
The variables taken from this file are:

muid    character    map unit identifier (first two characters are
the state abbreviation).

seqnum  integer      sequence number identifying the component
(there are up to 21 components in a map unit).

laydeph integer      depth of lower boundary of the layer (in
inches).  There are no more than 6 layers to a
component

laydepl integer      depth of upper boundary of the layer (in
inches).

awch    float        high range of available water capacity (in
inches per inch) for the given
layer/component/mapunit.

awcl    float        low range of available water capacity (in
inches per inch).

clayh   float        high range of percent of soil consisting of
clay (in percent of material less than 2mm in
size).

clayl   float        low range of percent of soil consisting of
clay (in percent).

kffact  float        actual k factor used in universal soil loss
equation to calculate soil loss by water.

llh     float        high range of liquid limit of soil layer
(in percent moisture by weight).

lll     float        low range of liquid limit of soil layer
(in percent moisture by weight).

omh     float        high range of organic material in the soil
(in percent by weight).

oml     float        low range of organic material in the soil (in
percent by weight).

permh   float        high range of the permeability of the soil
(in inches per hour).

perml   float        low range of the permeability of the soil (in
inches per hour).

First, we compute the average of the high and low values for those
variables expressed as a range.  We then average the varaiables over all
layers using the layer thickness (laydeph - laydepl) as weights.  The
final summary layer file contains a single weighted value for each
component of each mapunit.

The program then reads in the component file comp.state for each
state.  The variables read in are:

muid     character     the map unit identifier

seqnum   integer       the component number

compname character     the name of the component (contains useful
information for tagging certain types of
components as explained below).

compkind character     a one character code useful for tagging
certain types of components as explained below.

comppct  integer       the percent of the mapunit covered by the
particular component.

drainage  character    a two character code identifying the
quality of the drainage for the component.
The codes are E = excessive, SE = somewhat
excessive, W = well drained, MW = moderately
drained, SP = somewhat poorly drained,
P = poorly drained, and VP = very poorly
drained.  These codes are converted into
numeric values and assigned to the variable
drain as follows:  E = 1, SE = 2, W = 3,
MW = 4, SP = 5, P = 6 and VP = 7.

hydgrp    character    a three digit code identifying the
hydrologic characteristics of the soil.  The
codes are defined in the Statsgo information
guide.  We convert the character codes into
numeric codes according to Battaglin's methods.
The numeric codes are assigned to the variable
hygrp.  The codes are A = 1, B = 2, C = 3, D,
A/D, B/D, and C/D = 4.  Also, we subselect
areas and assign values for hygrp.
Miscellaneous areas (denoted by M in compkind)
and labeled as Dumps, and Gullied Land in
compname are assigned the hygrp = 2.5 if the
hydgrp value is missing.  Areas denoted
as Pits, Rock Outcrops, Terrace Escarpments,
and Urban land with missing hydgrp are
assigned a hygrp of 4.

hydric    character    Hydric soil rating, Y = hydric, N = non-hydric.

slope     float        The slope of the component (in percent).
The value read in from the comp.state file
is an average of the high and low range values
stored in the INFO comp file for that state.

anflood   character    Frequency of annual flooding.  Three classes,
frequent (FREQ) - greater than 50%,
occasional (OCCAS) 5-50% chance, and
rare (RARE) less than 5% chance.

The layer file and the comp file are merged together by muid and
seqnum.  Water denoted components (from compname) are assigned missing
values for all characteristics except comppct.  The numeric variables
are then averaged over all components within a mapunit using the
comppct as weights.  The final file gives one observation per map
unit.  Note that any remaining missing values are assigned the
value of -.1.   */

libname dir '';
filename outfile '/srv3/bsa/gschwarz/statsgo/ussoils.dat' ;

/*  Define the states for dynamically allocating files */

%let state1 = al ;
%let state2 = ar ;
%let state3 = az ;
%let state4 = ca ;
%let state5 = co ;
%let state6 = ct ;
%let state7 = de ;
%let state8 = fl ;
%let state9 = ga ;
%let state10 = ia ;
%let state11 = id ;
%let state12 = il ;
%let state13 = in ;
%let state14 = ks ;
%let state15 = ky ;
%let state16 = la ;
%let state17 = ma ;
%let state18 = md ;
%let state19 = me ;
%let state20 = mi ;
%let state21 = mn ;
%let state22 = mo ;
%let state23 = ms ;
%let state24 = mt ;
%let state25 = nc ;
%let state26 = nd ;
%let state27 = ne ;
%let state28 = nh ;
%let state29 = nj ;
%let state30 = nm ;
%let state31 = nv ;
%let state32 = ny ;
%let state33 = oh ;
%let state34 = ok ;
%let state35 = or ;
%let state36 = pa ;
%let state37 = ri ;
%let state38 = sc ;
%let state39 = sd ;
%let state40 = tn ;
%let state41 = tx ;
%let state42 = ut ;
%let state43 = va ;
%let state44 = vt ;
%let state45 = wa ;
%let state46 = wi ;
%let state47 = wv ;
%let state48 = wy ;

/*  Begin the macro  */

%macro loopy ;

/*  Iterate over conterminous states */

%do iter = 1 %to 48 ;

option dquote ;

/*  Dynamically define the layer and comp files for processing (by state) */

filename indatal "~/statsgo/layer.&amp;&amp;&amp;state&amp;iter" ;
filename indatac "~/statsgo/comp.&amp;&amp;&amp;state&amp;iter" ;

/*  Read in the layer specific data for each state */

data one ;
infile indatal missover ;
input
muid $ 2-8
seqnum 10-11
laydeph 13-14
laydepl 16-17
awch 19-22
awcl 24-27
clayh 29-30
clayl 32-33
kffact 35-38
omh 40-43
oml 45-48
permh 50-54
perml 56-60
llh 62-64
lll 66-68
;

/*  Compute the thickness of each layer and the thickness weighted
values of awc, clay, kffact, om, and perm.  If a range is given for
a variable, then take the average of the range */

thick = laydeph - laydepl ;
awc = thick*(awch + awcl)/2 ;
clay = thick*(clayh + clayl)/2 ;
kffact = thick*kffact ;
om = thick*(omh + oml)/2 ;
perm = thick*(permh + perml)/2 ;
ll = thick*(llh+lll)/2 ;

/*  m(varname) stores the thickness of layers in which missing values
for varname are encountered.  This information is necessary to ensure
we normalize the weights correctly later in the program */

if awc = . then mawc = thick ;
else mawc = 0 ;
if clay = . then mclay = thick ;
else mclay = 0 ;
if kffact = . then mkffact = thick ;
else mkffact = 0 ;
if om = . then mom = thick ;
else mom = 0 ;
if perm = . then mperm = thick ;
else mperm = 0 ;
if ll = . then mll = thick ;
else mll = 0 ;

keep muid seqnum thick awc clay kffact om perm ll
mawc mclay mkffact mom mperm mll ;

proc sort ; by muid seqnum ;

/*  Compute the sum of the  thickness*varname over all layers.
Also accumulate the thickness of layers where varname is
missing */

proc means noprint ;
var thick awc clay kffact om perm ll
mawc mclay mkffact mom mperm mll ;
by muid seqnum ;
output out = layer sum = thick awc clay kffact om perm ll
mawc mclay mkffact mom mperm mll ;

/*  Read in the state component files */

data comp ;
infile indatac missover ;
input
muid $ 2-7
seqnum 10-11
compname $ 13-42
compkind $ 44
comppct 46-48
drainage $ 50-54
hydgrp $ 62-64
hydric $ 66
slope 68-69
anflood $ 71-74 ;

proc sort; by muid seqnum ;

data comp ; merge comp layer ; by muid seqnum ;

/*  Recode the hydgrp data to numeric values (see Battaglin) */

if hydgrp = 'A  ' then hygrp = 1 ;
else if hydgrp = 'B  ' then hygrp = 2 ;
else if hydgrp = 'C  ' then hygrp = 3 ;
else if hydgrp = 'D  ' then hygrp = 4 ;
else if hydgrp = 'A/D' then hygrp = 4 ;
else if hydgrp = 'B/D' then hygrp = 4 ;
else if hydgrp = 'C/D' then hygrp = 4 ;
else hygrp = . ;

/*  Recode the drainage data to numeric values */

if drainage = 'A    ' then drain = 4.0 ;
else if drainage = 'E    ' then drain = 1.0 ;
else if drainage = 'E,MW ' then drain = 2.5 ;
else if drainage = 'E,P  ' then drain = 3.5 ;
else if drainage = 'E,SE ' then drain = 1.5 ;
else if drainage = 'E,W  ' then drain = 2.0 ;
else if drainage = 'MW   ' then drain = 4.0 ;
else if drainage = 'MW,A ' then drain = 4.0 ;
else if drainage = 'MW,P ' then drain = 5.0 ;
else if drainage = 'MW,SE' then drain = 3.0 ;
else if drainage = 'MW,SP' then drain = 4.5 ;
else if drainage = 'MW,W ' then drain = 3.5 ;
else if drainage = 'P    ' then drain = 6.0 ;
else if drainage = 'P,A  ' then drain = 5.0 ;
else if drainage = 'P,SP ' then drain = 5.5 ;
else if drainage = 'P,VP ' then drain = 6.5 ;
else if drainage = 'PD,A ' then drain = 5.0 ;
else if drainage = 'SE   ' then drain = 2.0 ;
else if drainage = 'SE,E ' then drain = 1.5 ;
else if drainage = 'SE,MW' then drain = 3.0 ;
else if drainage = 'SO   ' then drain = 5.0 ;
else if drainage = 'SP   ' then drain = 5.0 ;
else if drainage = 'SP,A ' then drain = 4.5 ;
else if drainage = 'SP,E ' then drain = 3.0 ;
else if drainage = 'SP,MW' then drain = 4.5 ;
else if drainage = 'SP,P ' then drain = 5.5 ;
else if drainage = 'SP,VP' then drain = 6.0 ;
else if drainage = 'SP,W ' then drain = 4.0 ;
else if drainage = 'SW   ' then drain = 4.0 ;
else if drainage = 'VP   ' then drain = 7.0 ;
else if drainage = 'VP,P ' then drain = 6.5 ;
else if drainage = 'VP,SP' then drain = 6.0 ;
else if drainage = 'W    ' then drain = 3.0 ;
else if drainage = 'W,A  ' then drain = 3.5 ;
else if drainage = 'W,E  ' then drain = 2.5 ;
else if drainage = 'W,MW ' then drain = 3.5 ;
else if drainage = 'W,SE ' then drain = 2.5 ;
else if drainage = 'W,SP ' then drain = 4.0 ;
else if drainage = 'W,VP ' then drain = 5.0 ;
else if drainage = 'WD   ' then drain = 3.0 ;
else drain = . ;

/*  Recode the anflood data */

if anflood = 'FREQ' then afldfreq = 1 ;
else if anflood = 'OCCA' then afldfreq = 2 ;
else if anflood = 'RARE' then afldfreq = 3 ;
else if anflood = 'NONE' then afldfreq = 4 ;
else afldfreq = . ;

/*  Recode the hydric data */

if hydric = 'Y' then ifhyd = 1 ;
else if hydric = 'N' then ifhyd = 0 ;
else ifhyd = . ;

/*  Assign default values to components denoted as Miscellaneous areas */

if compkind = 'M' then do ;

if compname = 'BEACHES' then do ;
if drain = . then drain = 6 ;
end ;
if compname = 'COASTAL BEACHES' then drain = 6 ;
if compname = 'COASTAL DUNES' then clay = 1 ;
if compname = 'DUMPS' then do ;
if hygrp = . then hygrp = 4 ;
end ;
if compname = 'GULLIED LAND' then do ;
if hygrp = . then hygrp = 2.5 ;
end ;
if compname = 'LAVA FLOWS' then do ;
if clay = . then clay = 0 ;
end ;
if compname = 'PITS' then do ;
if clay = . then clay = .5 ;
if hygrp = . then hygrp = 2.5 ;
end ;
if compname = 'ROCK OUTCROP' then do ;
if hygrp = . then hygrp = 4 ;
end ;
if compname = 'TERRACE ESCARPMENTS' or
compname = 'URBAN LAND' or
compname = 'URBANLAND' then hygrp = 4 ;

end ;

/*  Set numeric data to missing if the component is WATER */

if compname = 'WATER' then do ;
thick = . ;
awc = . ;
clay = . ;
kffact = . ;
om = . ;
perm = . ;
hygrp = . ;
drain = . ;
slope = . ;
ll = . ;
ifhyd = . ;
afldfreq = . ;
end ;

/* Compute the component weighted values, and normalize for thickness.
Set the variable to missing if thickness equals m(varname).  Other-
wise, normalize the layer weights by dividing by the total non-
missing thickness of all the layers.  */

if mawc = thick then awc = . ;
else awc = comppct*awc/(thick - mawc) ;
if mclay = thick then clay = . ;
else clay = comppct*clay/(thick - mclay) ;
if mkffact = thick then kffact = . ;
else kffact = comppct*kffact/(thick - mkffact) ;
if mom = thick then om = . ;
else om = comppct*om/(thick - mom) ;
if mperm = thick then perm = . ;
else perm = comppct*perm/(thick - mperm) ;
if mll = thick then ll = . ;
else ll = comppct*ll/(thick - mll) ;
thick = comppct*thick ;

hygrp = comppct*hygrp ;
drain = comppct*drain ;
slope = comppct*slope ;
ifhyd = comppct*ifhyd ;
afldfreq = comppct*afldfreq ;

/*  m(varname) stores the component pct of components in which missing values
for varname are encountered.  This information is necessary to ensure
we normalize the weights correctly later in the program */

if awc = . then mawc = comppct ;
else mawc = 0 ;
if clay = . then mclay = comppct ;
else mclay = 0 ;
if kffact = . then mkffact = comppct ;
else mkffact = 0 ;
if om = . then mom = comppct ;
else mom = 0 ;
if perm = . then mperm = comppct ;
else mperm = 0 ;
if ll = . then mll = comppct ;
else mll = 0 ;
if thick = . then mthick = comppct ;
else mthick = 0 ;
if hygrp = . then mhygrp = comppct ;
else mhygrp = 0 ;
if drain = . then mdrain = comppct ;
else mdrain = 0 ;
if slope = . then mslope = comppct ;
else mslope = 0 ;
if ifhyd = . then mifhyd = comppct ;
else mifhyd = 0 ;
if afldfreq = . then mafldf = comppct ;
else mafldf = 0 ;

keep muid seqnum comppct awc clay kffact om perm thick hygrp
drain slope ll ifhyd afldfreq
mawc mclay mkffact mom mperm mll mthick mhygrp mdrain
mslope mifhyd mafldf ;

/*  Sum the comppct*varname over components
Accumulate the missing comppct for each varname */

proc means data = comp noprint ;
var comppct awc clay kffact om perm thick hygrp drain
slope ll ifhyd afldfreq
mawc mclay mkffact mom mperm mll mthick mhygrp mdrain
mslope mifhyd mafldf ;
by muid ;
output out = mapunit
sum = comppct awc clay kffact om perm thick hygrp drain
slope ll ifhyd afldfreq
mawc mclay mkffact mom mperm mll mthick mhygrp mdrain
mslope mifhyd mafldf ;

data mapunit ; set mapunit ;

/* Normalize the averaged data for comppct.
Set the variable to missing if comppct equals m(varname). Other-
wise, normalize the comppct weights by dividing by the total non-
missing comppct of all the components.  */

if mawc = comppct then awc = . ;
else awc     = awc / (comppct - mawc) ;
if mclay = comppct then clay = . ;
else clay    = clay / (comppct - mclay) ;
if mkffact = comppct then kffact = . ;
else kffact  = kffact / (comppct - mkffact) ;
if mom = comppct then om = . ;
else om      = om / (comppct - mom) ;
if mperm = comppct then perm = . ;
else perm    = perm / (comppct - mperm) ;
if mthick = comppct then thick = . ;
else thick   = thick / (comppct - mthick) ;
if mhygrp = comppct then hygrp = . ;
else hygrp   = hygrp / (comppct - mhygrp) ;
if mdrain = comppct then drain = . ;
else drain   = drain / (comppct - mdrain) ;
if mslope = comppct then slope = . ;
else slope   = slope / (comppct - mslope) ;
if mll = comppct then ll = . ;
else ll      = ll / (comppct - mll) ;
if mifhyd = comppct then ifhyd = . ;
else ifhyd   = ifhyd / (comppct - mifhyd) ;
if mafldf = comppct then afldfreq = . ;
else afldfreq = afldfreq / (comppct - mafldf) ;

/* Extract the state abbreviation from the muid */

state = substr(muid,1,2) ;

/* Set missing values to -.1 */

if awc = . then awc = -.1 ;
if clay = . then clay = -.1 ;
if kffact = . then kffact = -.1 ;
if om = . then om = -.1 ;
if perm = . then perm = -.1 ;
if thick = . then thick = -.1 ;
if hygrp = . then hygrp = -.1 ;
if drain = . then drain = -.1 ;
if slope = . then slope = -.1 ;
if ll = . then ll = -.1 ;
if ifhyd = . then ifhyd = -.1 ;
if afldfreq = . then afldfreq = -.1 ;

com = ',' ;

/*  Append the state's map unit data to the ascii ussoils dataset */

file outfile mod ;
put
muid $ 1-7
com $ 8
state $ 9-10
com $ 11
awc 12-16 .2
com $ 17
clay 18-21 .1
com $ 22
kffact 23-27 .2
com $ 28
om 29-32 .1
com $ 33
perm 34-38 .2
com $ 39
thick 40-43 .1
com $ 44
hygrp 45-48 .1
com $ 49
drain 50-53 .1
com $ 54
slope 55-58 .1
com $ 59
ll 60-64 .1
com $ 65
ifhyd 66-69 .1
com $ 70
afldfreq 71-74 .1
;

drop _type_ _freq_ com mawc mclay mkffact mom mperm mll mthick
mhygrp mdrain mslope mifhyd mafldf ;

/*  Append the state's map unit data to the SAS ussoils dataset */

proc append base = dir.ussoils data = mapunit ;

%end ;

%mend loopy ;

/*  Execute the macro */

%loopy ;

5.  The AML "ussoils_muid_atts.aml" used to read the ascii file
created by the SAS program and create the PAT
coverage "ussoils.muid_atts."

/*----------------------------------------------------------------------
/*
/*  Command name: USSOILS_MUID_ATTS.AML
/*  Language: AML
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* Purpose:  Program creates the INFO attribute table USSOILS.MUID_ATTS
/*           from the computed averages of STATSGO variables created by
/*           the SAS program setussoils.sas.
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* Comments:
/* 1. Item description:
/*   AWC = available water capacity (inches/inch)
/*   CLAY = clay content of soil (% of soil &lt; 2mm in size)
/*   KFFACT = soil erodibility f-factor
/*   OM = organic matter content (% by weight)
/*   PERM = permeability rates (inches/hour)
/*   THICK = total thickness of all sampled soil layers (inches)
/*   HYGRP = soil index variables (1=well drained to 4=poorly drained)
/*   DRAIN = soil index variable (1=well drained to 7=poorly drained)
/*   SLOPE = average slope (%)
/*   LL = liquid limit (percent moisture by weight)
/*   IFHYDRIC = hydric soil indicator (1 if hydric)
/*   AFLDFREQ = annual flood frequency (1 = frequent (&gt;50% chance)
/*              2 = occasional (5-50% chance), 3 = rare (&lt;5% chance))
/*
/* 2. Relate the USSOILS.PAT file to USSOILS.MUID_ATTS to determine map unit
/*    identifiers for map units that are in USSOILS.PAT but not in
/*    COMP or LAYER files, and thus not in USSOILS.MUID_ATTS.  These
/*    missing MUIDs are then written to a temporary file, where they are
/*    summarized (to eliminate redundancies from multiple polygons in
/*    USSOILS.PAT having the same MUIDs), and then added to
/*    USSOILS.MUID_ATTS.
/*
/* 3. The missing MUIDs added into USSOILS.MUID_ATTS have no attribute
/*    information.  We reselect these MUIDs and assign missing values to
/*    all the items, except for STATE.  To fill in STATE, we create the
/*    redefined item STID that consists of the first two characters of
/*    MUID.  We then move this value into the value for STATE.
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* History:
/*     Author/Site,                Date,        Event
/*     ------------------------------------------------------------
/*      R. Alexander/G. Schwarz    04/24/95    CREATED
/*      R. Alexander/G. Schwarz    09/08/95    Modified to create
/*                                             USSOILS.MUID_ATTS only
/*                                             and to include missing
/*                                             MUIDs in the
/*                                             USSOILS.MUID_ATTS file.
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
&amp;DATA arc info
ARC
/*
CALC $NM = 1
CALC $COMMA-SWITCH = -1
CALC $PRINTER-SIZE = 200
/*======================================================================
/*
DEFINE USSOILS.MUID_ATTS
MUID,7,7,C
STATE,2,2,C
AWC,4,5,F,2
CLAY,4,4,F,1
KFFACT,4,5,F,2
OM,4,4,F,1
PERM,4,5,F,2
THICK,4,4,F,1
HYGRP,4,4,F,1
DRAIN,4,4,F,1
SLOPE,4,4,F,1
LL,4,5,F,1
IFHYDRIC,4,4,F,1
AFLDFREQ,4,4,F,1

/*
ADD FROM /srv3/bsa/gschwarz/statsgo/ussoils.dat
SEL USSOILS.MUID_ATTS
SORT MUID
/*
/* Create temporary file FILE1 to hold missing values.
/*
SEL USSOILS.MUID_ATTS
REDEFINE
1
STID
2
2
C

MODIFY FILE1
/*
/* Find missing MUIDs in USSOILS.PAT and put in FILE1
/*
SEL USSOILS.PAT
RELATE USSOILS.MUID_ATTS 1 MUID ORDER
RESEL MUID NE $1MUID
RESEL MUID NE ''
RELATE FILE1 2 MUID INIT
MOVE MUID TO $2MUID
SEL FILE1
SORT MUID
/*
/* Relate FILE1 to USSOILS.MUID_ATTS by MUID and do SUMMARY
/*
RELATE USSOILS.MUID_ATTS 1 MUID SUMMARY
/*
/* set all MUID not in COMP files with water designation to missing
/*
CALC $1AWC = -0.1
CALC $1CLAY = -0.1
CALC $1KFFACT = -0.1
CALC $1OM = -0.1
CALC $1PERM = -0.1
CALC $1THICK = -0.1
CALC $1HYGRP = -0.1
CALC $1DRAIN = -0.1
CALC $1SLOPE = -0.1
CALC $1LL = -0.1
CALC $1IFHYDRIC = -0.1
CALC $1AFLDFREQ = -0.1
MOVE STID TO $1STATE
/*
/* Delete the temporary file FILE1
/*
SEL FILE1
ERASE FILE1
Y

SEL USSOILS.MUID_ATTS
SORT MUID
/*
Q STOP
&amp;END
DROPITEM USSOILS.MUID_ATTS USSOILS.MUID_ATTS STID

6.  The AML 'ussoils_atts.aml' which may be used to transfer the attribute infor
contained in the attribute table USSOILS.MUID_ATTS to the polygon attribute tabl
USSOILS.PAT to permit mapping the attribute information.

/*----------------------------------------------------------------------
/*
/*  Command name: USSOILS_ATTS.AML
/*  Language: AML
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* Purpose:  Program creates attribute information for the national
/* coverage USSOILS.PAT.  The attribute information is taken from the
/* info file USSOILS.MUID_ATTS.
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* Comments:
/* 1. Item description:
/*   AWC = available water capacity (inches/inch)
/*   CLAY = clay content of soil (% of soil &lt; 2mm in size)
/*   KFFACT = soil erodibility f-factor
/*   OM = organic matter content (% by weight)
/*   PERM = permeability rates (inches/hour)
/*   THICK = total thickness of all sampled soil layers (inches)
/*   HYGRP = soil index variables (1=well drained to 4=poorly drained)
/*   DRAIN = soil index variable (1=well drained to 7=poorly drained)
/*   SLOPE = average slope (%)
/*   LL = liquid limit (percent moisture by weight)
/*   IFHYDRIC = hydric soil indicator (1 if hydric)
/*   AFLDFREQ = annual flood frequency (1 = frequent (&gt;50% chance)
/*              2 = occasional (5-50% chance), 3 = rare (&lt;5% chance))
/*
/* 2. Items are ADDED to USSOILS.PAT, then we RELATE to USSOILS.MUID_ATTS
/*    on the basis of MUID.  Note that there are 3 MUIDS contained in
/*    USSOILS.MUID_ATTS that are not in USSOILS.PAT.
/*
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
/* History:
/*     Author/Site,                Date,        Event
/*     ------------------------------------------------------------
/*      R. Alexander/G. Schwarz    09/08/95    CREATED
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
/*
ADDITEM USSOILS.PAT USSOILS.PAT STATE 2 2 C
ADDITEM USSOILS.PAT USSOILS.PAT AWC 4 5 F 2
ADDITEM USSOILS.PAT USSOILS.PAT CLAY 4 4 F 1
ADDITEM USSOILS.PAT USSOILS.PAT KFFACT 4 5 F 2
ADDITEM USSOILS.PAT USSOILS.PAT OM 4 4 F 1
ADDITEM USSOILS.PAT USSOILS.PAT PERM 4 5 F 2
ADDITEM USSOILS.PAT USSOILS.PAT THICK 4 4 F 1
ADDITEM USSOILS.PAT USSOILS.PAT HYGRP 4 4 F 1
ADDITEM USSOILS.PAT USSOILS.PAT DRAIN 4 4 F 1
ADDITEM USSOILS.PAT USSOILS.PAT SLOPE 4 4 F 1
ADDITEM USSOILS.PAT USSOILS.PAT LL 4 5 F 1
ADDITEM USSOILS.PAT USSOILS.PAT IFHYDRIC 4 4 F 1
ADDITEM USSOILS.PAT USSOILS.PAT AFLDFREQ 4 4 F 1
/*
&amp;DATA arc info
ARC
/*
CALC $NM = 1
CALC $COMMA-SWITCH = -1
CALC $PRINTER-SIZE = 200
/*======================================================================
/*
SEL USSOILS.PAT
RELATE USSOILS.MUID_ATTS 1 MUID ORDER
MOVE $1STATE TO STATE
CALC AWC = $1AWC
CALC CLAY = $1CLAY
CALC KFFACT = $1KFFACT
CALC OM = $1OM
CALC PERM = $1PERM
CALC THICK = $1THICK
CALC HYGRP = $1HYGRP
CALC DRAIN = $1DRAIN
CALC SLOPE = $1SLOPE
CALC LL = $1LL
CALC IFHYDRIC = $1IFHYDRIC
CALC AFLDFREQ = $1AFLDFREQ
/*
Q STOP
&amp;END
&amp;RETURN
</supplinf>
            <langdata Sync="TRUE">en</langdata>
        </descript>
        <timeperd>
            <timeinfo>
                <caldate>Unknown</caldate>
                <sngdate>
                    <caldate>1995</caldate>
                </sngdate>
            </timeinfo>
            <current>1995</current>
        </timeperd>
        <status>
            <progress>Complete</progress>
            <update>As needed</update>
        </status>
        <spdom>
            <bounding>
                <westbc Sync="TRUE">-118.611577</westbc>
                <eastbc Sync="TRUE">-110.215072</eastbc>
                <northbc Sync="TRUE">49.050811</northbc>
                <southbc Sync="TRUE">41.081491</southbc>
            </bounding>
            <lboundng>
                <leftbc Sync="TRUE">2162468.000000</leftbc>
                <rightbc Sync="TRUE">2776874.000000</rightbc>
                <bottombc Sync="TRUE">1105811.000000</bottombc>
                <topbc Sync="TRUE">1983328.000000</topbc>
            </lboundng>
        </spdom>
        <keywords>
            <theme>
                <themekt>None</themekt>
                <themekey>State Soil Geographic (STATSGO) Data Base for the Conterminous United States</themekey>
            </theme>
            <place>
                <placekt>None</placekt>
                <placekey>Conterminous U.S.</placekey>
            </place>
            <stratum>
                <stratkt>None</stratkt>
                <stratkey>None</stratkey>
            </stratum>
            <temporal>
                <tempkt>None</tempkt>
                <tempkey>None</tempkey>
            </temporal>
        </keywords>
        <accconst>None</accconst>
        <useconst>
The National Resource Conservation Service recommends that the data not
be used to describe soil characteristics for regions smaller than a
multi-county area.
</useconst>
        <ptcontac>
            <cntinfo>
                <cntperp>
                    <cntper>Gregory E. Schwarz</cntper>
                    <cntorg>U.S. Geological Survey, Water Resources Div. (WRD)</cntorg>
                </cntperp>
                <cntpos>Economist, Branch of Systems Analysis</cntpos>
                <cntaddr>
                    <addrtype>mailing address</addrtype>
                    <address>12201 Sunrise Valley Drive, MS 410</address>
                    <city>Reston</city>
                    <state>VA</state>
                    <postal>20191</postal>
                    <country>USA</country>
                </cntaddr>
                <cntvoice>703-648-5718</cntvoice>
                <cntfax>703-648-5295</cntfax>
                <cntemail>gschwarz@usgs.gov</cntemail>
                <hours>9:00am-5:00pm EST</hours>
                <cntinst>Please contact thru email</cntinst>
            </cntinfo>
        </ptcontac>
        <datacred>See References  m:/sdata/land/statsgo.pdf</datacred>
        <secinfo>
            <secsys>None</secsys>
            <secclass>Unclassified</secclass>
            <sechandl>None</sechandl>
        </secinfo>
        <native Sync="FALSE">ESRI ArcCatalog 9.3.1.3500</native>
        <crossref>
            <citeinfo>
                <origin>U.S. Dept. of Agriculture, Soil Conservation Service, National Coop. Soil Survey</origin>
                <pubdate>October 1994</pubdate>
                <title>State Soil Geographic (STATSGO) Data Base:  U.S. Coverage by States ...</title>
                <geoform>map</geoform>
                <othercit>ARC/INFO 7.0 Coverage on CDROM</othercit>
            </citeinfo>
        </crossref>
        <natvform Sync="FALSE">Feature Class</natvform>
    </idinfo>
    <dataqual>
        <attracc>
            <attraccr>See Entity_Attribute_Information</attraccr>
            <qattracc>
                <attraccv>See Explanation</attraccv>
                <attracce>
Attribute accuracy is described, where present, with each
attribute defined in the Entity and Attribute Section.
</attracce>
            </qattracc>
        </attracc>
        <logic>Polygon topology present.</logic>
        <lineage>
            <srcinfo>
                <srcscale>250,000</srcscale>
            </srcinfo>
            <procstep>
                <procdate>1995</procdate>
            </procstep>
        </lineage>
        <cloud>Not Applicable</cloud>
        <posacc>
            <horizpa>
                <horizpar>1:250K or Approximately 1500 Acres Minimum Mapping Unit</horizpar>
            </horizpa>
        </posacc>
    </dataqual>
    <spdoinfo>
        <direct Sync="TRUE">Vector</direct>
        <ptvctinf>
            <esriterm Name="Statsgo">
                <efeatyp Sync="TRUE">Simple</efeatyp>
                <efeageom Sync="TRUE" code="4"/>
                <esritopo Sync="TRUE">FALSE</esritopo>
                <efeacnt Sync="TRUE">2000</efeacnt>
                <spindex Sync="TRUE">TRUE</spindex>
                <linrefer Sync="TRUE">FALSE</linrefer>
            </esriterm>
        </ptvctinf>
    </spdoinfo>
    <spref>
        <horizsys>
            <planar>
                <planci>
                    <plance Sync="TRUE">coordinate pair</plance>
                    <coordrep>
                        <absres Sync="TRUE">0.000122</absres>
                        <ordres Sync="TRUE">0.000122</ordres>
                    </coordrep>
                    <plandu Sync="TRUE">meters</plandu>
                </planci>
            </planar>
            <geodetic>
                <horizdn Sync="TRUE">North American Datum of 1983</horizdn>
                <ellips Sync="TRUE">Geodetic Reference System 80</ellips>
                <semiaxis Sync="TRUE">6378137.000000</semiaxis>
                <denflat Sync="TRUE">298.257222</denflat>
            </geodetic>
            <cordsysn>
                <geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
                <projcsn Sync="TRUE">IDTM83</projcsn>
            </cordsysn>
        </horizsys>
        <vertdef>
            <altsys>
                <altenc Sync="TRUE">Explicit elevation coordinate included with horizontal coordinates</altenc>
                <altres Sync="TRUE">1.000000</altres>
            </altsys>
        </vertdef>
    </spref>
    <eainfo>
        <detailed Name="Statsgo">
            <enttyp>
                <enttypl Sync="FALSE">Statsgo</enttypl>
                <enttypd>Selected items of hydrologic relevance from the STATSGO Data Base</enttypd>
                <enttypds>STATSGO Data Base ARC/INFO 7.0 Coverage CD-ROM, October 1994</enttypds>
                <enttypt Sync="TRUE">Feature Class</enttypt>
                <enttypc Sync="TRUE">2000</enttypc>
            </enttyp>
            <attr>
                <attrlabl Sync="TRUE">OBJECTID</attrlabl>
                <attrdef Sync="TRUE">Internal feature number.</attrdef>
                <attrdefs Sync="TRUE">ESRI</attrdefs>
                <attrdomv>
                    <edom>
                        <edomv>-</edomv>
                    </edom>
                    <udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
                </attrdomv>
                <attalias Sync="TRUE">OBJECTID</attalias>
                <attrtype Sync="TRUE">OID</attrtype>
                <attwidth Sync="TRUE">4</attwidth>
                <atprecis Sync="TRUE">10</atprecis>
                <attscale Sync="TRUE">0</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">MUID</attrlabl>
                <attrdef>Mapunit Identification code - used to reference observations</attrdef>
                <attrdefs>STATSGO, October 1994</attrdefs>
                <attrdomv>
                    <edom>
                        <edomv>Character</edomv>
                    </edom>
                </attrdomv>
                <attalias Sync="TRUE">MUID</attalias>
                <attrtype Sync="TRUE">String</attrtype>
                <attwidth Sync="TRUE">7</attwidth>
                <atprecis Sync="TRUE">0</atprecis>
                <attscale Sync="TRUE">0</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">IFHYDRIC</attrlabl>
                <attalias Sync="TRUE">ACRES</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">AFLDFREQ</attrlabl>
                <attalias Sync="TRUE">AFLDFREQ</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">Shape.STArea()</attrlabl>
                <attalias Sync="TRUE">Shape.STArea()</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">0</attwidth>
                <atprecis Sync="TRUE">0</atprecis>
                <attscale Sync="TRUE">0</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">Shape.STLength()</attrlabl>
                <attalias Sync="TRUE">Shape.STLength()</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">0</attwidth>
                <atprecis Sync="TRUE">0</atprecis>
                <attscale Sync="TRUE">0</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">HUC4CODE</attrlabl>
                <attalias Sync="TRUE">HUC4CODE</attalias>
                <attrtype Sync="TRUE">Integer</attrtype>
                <attwidth Sync="TRUE">4</attwidth>
                <atprecis Sync="TRUE">10</atprecis>
                <attscale Sync="TRUE">0</attscale>
                <attrdef Sync="TRUE">Feature geometry.</attrdef>
                <attrdefs Sync="TRUE">ESRI</attrdefs>
                <attrdomv>
                    <udom Sync="TRUE">Coordinates defining the features.</udom>
                </attrdomv>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">Shape</attrlabl>
                <attalias Sync="TRUE">Shape</attalias>
                <attrtype Sync="TRUE">Geometry</attrtype>
                <attwidth Sync="TRUE">4</attwidth>
                <atprecis Sync="TRUE">0</atprecis>
                <attscale Sync="TRUE">0</attscale>
                <attrdef Sync="TRUE">Feature geometry.</attrdef>
                <attrdefs Sync="TRUE">ESRI</attrdefs>
                <attrdomv>
                    <udom Sync="TRUE">Coordinates defining the features.</udom>
                </attrdomv>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">SHAPE</attrlabl>
                <attalias Sync="TRUE">BASINS</attalias>
                <attrtype Sync="TRUE">String</attrtype>
                <attwidth Sync="TRUE">35</attwidth>
                <atprecis Sync="TRUE">0</atprecis>
                <attscale Sync="TRUE">0</attscale>
                <attrdef Sync="TRUE">Feature geometry.</attrdef>
                <attrdefs Sync="TRUE">ESRI</attrdefs>
                <attrdomv>
                    <udom Sync="TRUE">Coordinates defining the features.</udom>
                </attrdomv>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">BASINS</attrlabl>
                <attalias Sync="TRUE">HUC4NAME</attalias>
                <attrtype Sync="TRUE">String</attrtype>
                <attwidth Sync="TRUE">50</attwidth>
                <atprecis Sync="TRUE">0</atprecis>
                <attscale Sync="TRUE">0</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">HUC4NAME</attrlabl>
                <attalias Sync="TRUE">SQ_MILES</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">SQ_MILES</attrlabl>
                <attalias Sync="TRUE">DEQ_ADM</attalias>
                <attrtype Sync="TRUE">String</attrtype>
                <attwidth Sync="TRUE">12</attwidth>
                <atprecis Sync="TRUE">0</atprecis>
                <attscale Sync="TRUE">0</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">DEQ_ADM</attrlabl>
                <attalias Sync="TRUE">AWC</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">AWC</attrlabl>
                <attalias Sync="TRUE">CLAY</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">CLAY</attrlabl>
                <attalias Sync="TRUE">KFFACT</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">KFFACT</attrlabl>
                <attalias Sync="TRUE">OM</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">OM</attrlabl>
                <attalias Sync="TRUE">PERM_</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">PERM_</attrlabl>
                <attalias Sync="TRUE">THICK</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">THICK</attrlabl>
                <attalias Sync="TRUE">HYGRP</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">HYGRP</attrlabl>
                <attalias Sync="TRUE">DRAIN</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">DRAIN</attrlabl>
                <attalias Sync="TRUE">SLOPE</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">SLOPE</attrlabl>
                <attalias Sync="TRUE">LL</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
            <attr>
                <attrlabl Sync="TRUE">LL</attrlabl>
                <attalias Sync="TRUE">IFHYDRIC</attalias>
                <attrtype Sync="TRUE">Double</attrtype>
                <attwidth Sync="TRUE">8</attwidth>
                <atprecis Sync="TRUE">38</atprecis>
                <attscale Sync="TRUE">8</attscale>
            </attr>
        </detailed>
        <overview>
            <eaover>
The attribute table, USSOILS.MUID_ATTS, contains the following items for
each map unit:

Label         Type           Description

muid          character      Map unit identifier (first two characters
are the state abbreviation).

state         character      2-character State abbreviation.

awc           float          Available water capacity (in inches per
inch).  Computed as a layer thickness
weighted average, across soil layers, of a
simple average of awch and awcl contained in
the STATSGO layer file.  Missing value
.FALSE.

clay          float          Percent of soil consisting of clay (in
percent of material less than 2mm in size).
Computed as a layer thickness weighted
average, across soil layers, of a simple
average of clayh and clayl contained in the
STATSGO layer file.  Missing value indicator
= -0.1.

kffact        float          Actual k factor used in universal soil loss
equation to calculate soil loss by water.
Computed as a layer thickness weighted
average, across soil layers, of the variable
kffact contained in the STATSGO layer file.
Missing value indicator = -0.1.

ll            float          Liquid limit of soil layer (in percent
moisture by weight).  Computed as a layer
thickness weighted average, across soil
layers, of a simple average of llh and lll
contained in the STATSGO layer file.
Missing value indicator = -0.1.

om            float          Organic material in the soil (in percent by
weight).  Computed as a layer thickness
weighted average, across soil layers, of a
simple average of omh and oml contained in
the STATSGO layer file. Missing value
.FALSE.

perm          float          Permeability of the soil (in inches per
hour). Computed as a layer thickness
weighted average, across soil layers, of a
simple average of permh and perml contained
in the STATSGO layer file.  Missing value
.FALSE.

thick         float          Depth of soil layers (in inches).  Computed
as the sum of the differences between
laydeph and laydepl for each soil layer in
the STATSGO layer file.  Missing value
.FALSE.

hygrp         float          A code identifying the hydrologic
characteristics of the soil.  The character
codes defined in the STATSGO component file
are converted into numeric codes according
to Bill Battaglin's methods (Battaglin,
written communication dated March 8, 1995).
The coding transformations are A = 1 (high
infiltration, deep soils, well drained to
excessively drained sands and gravels), B =
2 (moderate infiltration rates, deep and
moderately deep, moderately well and well
drained soils with moderately coarse
textures), C = 3 (slow infiltration rates,
soils with layers impeding downward movement
of water, or soils with moderately fine or
fine textures), D = 4 (very slow
infiltration rates, soils are clayey, have a
high water table, or are shallow to an
impervious layer),  Mixture codes A/D, B/D,
and C/D are assigned the value 4.  Also, we
subselect certain areas and assign values
for hygrp based on the area type.
Miscellaneous areas (denoted by M in
compkind) and labeled as Dumps, and Gullied
Land in compname are assigned the hygrp =
2.5 if the hydgrp value is missing.  Areas
denoted as Pits, Rock Outcrops, Terrace
Escarpments, and Urban land with missing
hydgrp are assigned a hygrp of 4. See the
documentation of the SAS program
"setussoils.sas" for additional details.
The transformed data are averaged across
components using the component percentage as
weights. The missing value indicator is -
0.1.

drain         float          A code identifying the quality of soil
drainage.  The two character code from the
STATSGO component file is converted to a
numeric value according to the following
translation:  E = 1 (excessive), SE = 2
(somewhat excessive), W = 3 (well drained),
MW = 4 (moderately drained), SP = 5
(somewhat poorly drained), P = 6 (poorly
drained), and VP = 7 (very poorly drained).
The values are averaged across components
using the component percentage as weights.
The missing value indicator is -0.1.

slope         float          The slope of the map unit (in percent).
Slope values contained in the STATSGO
component file are averaged using the
component percentage as weights.  The
missing value indicator is -0.1.

ifhydric      float          Share of map unit with hydric soils (1 =
entire map unit has hydric soils).  Computed
by summing the component percentage for each
component designated as having hydric soils
according to the variable hydric in the
STATSGO component file.  Missing value
.FALSE.

afldfreq      float          Annual flood frequency code.  Flood
frequency designations contained in the
variable anflood in the STATSGO component
file are converted to numeric codes
according to the following translation:  1 =
greater than 50%, 2 = 5% to 50%, 3 = 0% to
5%, and 4 = no flood.  Translated variables
are averaged across components using the
component percentage as weights.  The
missing value indicator is -0.1.
</eaover>
            <eadetcit>Not Available</eadetcit>
            <dsoverv>Statsgo summary statistics for Idaho HUCs. Overlayed with 4th HUCs to provide HUC level Analysis</dsoverv>
        </overview>
        <detailed Name="STATSGO_to_COMP">
            <enttyp>
                <enttypl Sync="FALSE">STATSGO_to_COMP</enttypl>
                <enttypt Sync="TRUE">Relationship</enttypt>
            </enttyp>
        </detailed>
        <detailed Name="STATSGO_TO_LAYER">
            <enttyp>
                <enttypl Sync="FALSE">STATSGO_TO_LAYER</enttypl>
                <enttypt Sync="TRUE">Relationship</enttypt>
            </enttyp>
        </detailed>
    </eainfo>
    <metainfo>
        <metd Sync="TRUE">20100225</metd>
        <metc>
            <cntinfo>
                <cntperp>
                    <cntper>Gregory E. Schwarz</cntper>
                    <cntorg>U.S. Geological Survey, Water Resources Div. (WRD)</cntorg>
                </cntperp>
                <cntpos>Economist, Branch of Systems Analysis</cntpos>
                <cntaddr>
                    <addrtype>mailing address</addrtype>
                    <address>12201 Sunrise Valley Drive, MS 410</address>
                    <city>Reston</city>
                    <state>VA</state>
                    <postal>20191</postal>
                    <country>USA</country>
                </cntaddr>
                <cntvoice>703-648-5718</cntvoice>
                <cntfax>703-648-5295</cntfax>
                <cntemail>gschwarz@usgs.gov</cntemail>
                <hours>9:00am-5:00pm EST</hours>
                <cntinst>Please contact thru email</cntinst>
            </cntinfo>
        </metc>
        <metstdn Sync="TRUE">FGDC Content Standards for Digital Geospatial Metadata</metstdn>
        <metstdv Sync="TRUE">FGDC-STD-001-1998</metstdv>
        <mettc Sync="TRUE">local time</mettc>
        <metsi>
            <metscs>None</metscs>
            <metsc>Unclassified</metsc>
            <metshd>None</metshd>
        </metsi>
        <langmeta Sync="TRUE">en</langmeta>
    </metainfo>
    <Esri>
        <CreaDate>20140307</CreaDate>
        <CreaTime>10491200</CreaTime>
        <SyncOnce>FALSE</SyncOnce>
        <SyncDate>20250401</SyncDate>
        <SyncTime>11463500</SyncTime>
        <ModDate>20250401</ModDate>
        <ModTime>11463500</ModTime>
        <DataProperties>
            <itemProps>
                <itemName Sync="FALSE">Statsgo</itemName>
                <imsContentType Sync="TRUE">002</imsContentType>
                <nativeExtBox>
                    <westBL Sync="TRUE">2162468.000000</westBL>
                    <eastBL Sync="TRUE">2776874.000000</eastBL>
                    <southBL Sync="TRUE">1105811.000000</southBL>
                    <northBL Sync="TRUE">1983328.000000</northBL>
                    <exTypeCode Sync="TRUE">1</exTypeCode>
                </nativeExtBox>
                <relatedItems>
                    <item>
                        <itemName/>
                    </item>
                    <item>
                        <itemName/>
                        <itemType Sync="TRUE">Relationship</itemType>
                    </item>
                    <item>
                        <itemName Sync="FALSE">STATSGO_TO_LAYER</itemName>
                        <itemType Sync="TRUE">Relationship</itemType>
                    </item>
                </relatedItems>
            </itemProps>
            <coordRef>
                <type Sync="TRUE">Projected</type>
                <geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
                <csUnits Sync="TRUE">Linear Unit: Meter (1.000000)</csUnits>
                <projcsn Sync="TRUE">NAD_1983_Idaho_TM</projcsn>
                <peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.8'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_Idaho_TM&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983&amp;quot;,DATUM[&amp;quot;D_North_American_1983&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Transverse_Mercator&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,2500000.0],PARAMETER[&amp;quot;False_Northing&amp;quot;,1200000.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-114.0],PARAMETER[&amp;quot;Scale_Factor&amp;quot;,0.9996],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,42.0],UNIT[&amp;quot;Meter&amp;quot;,1.0],AUTHORITY[&amp;quot;EPSG&amp;quot;,8826]]&lt;/WKT&gt;&lt;XOrigin&gt;-3120900&lt;/XOrigin&gt;&lt;YOrigin&gt;-13447900&lt;/YOrigin&gt;&lt;XYScale&gt;8192&lt;/XYScale&gt;&lt;ZOrigin&gt;0&lt;/ZOrigin&gt;&lt;ZScale&gt;1&lt;/ZScale&gt;&lt;MOrigin&gt;0&lt;/MOrigin&gt;&lt;MScale&gt;1&lt;/MScale&gt;&lt;XYTolerance&gt;2&lt;/XYTolerance&gt;&lt;ZTolerance&gt;2&lt;/ZTolerance&gt;&lt;MTolerance&gt;2&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;102605&lt;/WKID&gt;&lt;LatestWKID&gt;8826&lt;/LatestWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
            </coordRef>
        </DataProperties>
        <ArcGISFormat>1.0</ArcGISFormat>
        <ArcGISstyle>FGDC CSDGM Metadata</ArcGISstyle>
        <scaleRange>
            <minScale>150000000</minScale>
            <maxScale>5000</maxScale>
        </scaleRange>
        <ArcGISProfile>FGDC</ArcGISProfile>
    </Esri>
    <dataIdInfo>
        <envirDesc Sync="TRUE"> Version 6.2 (Build 9200) ; Esri ArcGIS 10.9.1.28388</envirDesc>
        <dataLang>
            <languageCode Sync="TRUE" value="eng"/>
            <countryCode Sync="TRUE" value="USA"/>
        </dataLang>
        <idCitation>
            <resTitle Sync="FALSE">Statsgo Soil Characteristics Version 1</resTitle>
            <presForm>
                <PresFormCd Sync="TRUE" value="005"/>
            </presForm>
        </idCitation>
        <spatRpType>
            <SpatRepTypCd Sync="TRUE" value="001"/>
        </spatRpType>
        <geoBox esriExtentType="decdegrees">
            <westBL Sync="TRUE">-118.611577</westBL>
            <eastBL Sync="TRUE">-110.215072</eastBL>
            <northBL Sync="TRUE">49.050811</northBL>
            <southBL Sync="TRUE">41.081491</southBL>
            <exTypeCode Sync="TRUE">1</exTypeCode>
        </geoBox>
        <dataExt>
            <geoEle>
                <GeoBndBox esriExtentType="native">
                    <westBL Sync="TRUE">2162468</westBL>
                    <eastBL Sync="TRUE">2776874</eastBL>
                    <northBL Sync="TRUE">1983328</northBL>
                    <southBL Sync="TRUE">1105811</southBL>
                    <exTypeCode Sync="TRUE">1</exTypeCode>
                </GeoBndBox>
            </geoEle>
        </dataExt>
        <dataExt>
            <geoEle>
                <GeoBndBox esriExtentType="search">
                    <exTypeCode Sync="TRUE">1</exTypeCode>
                    <westBL Sync="TRUE">-118.611577</westBL>
                    <eastBL Sync="TRUE">-110.215072</eastBL>
                    <northBL Sync="TRUE">49.050811</northBL>
                    <southBL Sync="TRUE">41.081491</southBL>
                </GeoBndBox>
            </geoEle>
        </dataExt>
        <idPurp>The USSOILS coverage was originally compiled to support a national model
of water quality.  The model uses the soil characteristics contained in
this coverage to mediate deliveries of nonpoint source pollution to
stream and river segments in the RF1 data base. The National Resource
Conservation Service (NRCS) recommends that any maps using NRCS STATSGO
data show the source and date, and provide the following statement:

"STATSGO is designed to support regional, multistate, State, and river
basin resource planning, management and monitoring."</idPurp>
        <idAbs>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;Statsgo was created from the Nationwide USSOILS and imported into SDE by USGS 4th Field HUC for TMDL projects. The following is a summary of the Master Nationwide dataset used for hydrological analysis. USSOILS is an Arc 7.0 coverage containing hydrology-relevant information for 10,498 map units covering the entire conterminous United States. The coverage was compiled from individual State coverages contained in the October 1994 State Soil Geographic (STATSGO) Data Base produced on CD-ROM. The geo-dataset USSOILS.PAT relates (on the basis of a map unit identifier) the 10,498 map units to 78,518 polygons. The scale of the geo-dataset is 1:250,000. The INFO attribute table USSOILS.MUID_ATTS contains selected variables from the STATSGO data set for 10,501 map units (an extra 3 map units are contained in the attribute table that are not in the geo-dataset - see the 'Procedures' section below), including: the map unit identifier, a 2-character state abbreviation, available water capacity of the soil, percent clay in the soil, the actual k-factor used in the water erosion component of the universal soil loss equation, the organic material in soil, soil permeability, cumulative thickness of all soil layers, hydrologic characteristics of the soil, quality of drainage, surface slope, liquid limit of the soil, share of a map unit having hydric soils, and the annual frequency of flooding. To facilitate mapping the attribute data, the narrative section below contains instructions for transferring the information contained in the attribute table USSOILS.MUID_ATTS to the polygon attribute table USSOILS.PAT. STATSGO United States Soil Water Capacity Clay Organic material Permeability Infiltration Drainage Hydric Flood frequency Slope&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;</idAbs>
        <idCredit>See References  m:/sdata/land/statsgo.pdf</idCredit>
        <searchKeys>
            <keyword>State Soil Geographic (STATSGO) Data Base for the Conterminous United States</keyword>
        </searchKeys>
        <resConst>
            <Consts>
                <useLimit>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;The National Resource Conservation Service recommends that the data not be used to describe soil characteristics for regions smaller than a multi-county area.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;</useLimit>
            </Consts>
        </resConst>
    </dataIdInfo>
    <mdLang>
        <languageCode Sync="TRUE" value="eng"/>
        <countryCode Sync="TRUE" value="USA"/>
    </mdLang>
    <mdStanName Sync="TRUE">ISO 19115 Geographic Information - Metadata</mdStanName>
    <mdStanVer Sync="TRUE">DIS_ESRI1.0</mdStanVer>
    <mdChar>
        <CharSetCd Sync="TRUE" value="004"/>
    </mdChar>
    <mdHrLv>
        <ScopeCd Sync="TRUE" value="005"/>
    </mdHrLv>
    <mdHrLvName Sync="TRUE">dataset</mdHrLvName>
    <distinfo>
        <resdesc>Downloadable Data From USGS</resdesc>
        <distrib>
            <cntinfo>
                <cntperp>
                    <cntper>Schwarz, G.E. and Alexander, R.B.</cntper>
                    <cntorg>U.S. Geological Survey, Water Resources Div. (WRD)</cntorg>
                </cntperp>
                <cntpos>Economist, Branch of Systems Analysis</cntpos>
                <cntvoice>703-648-5718</cntvoice>
                <cntfax>703-648-5295</cntfax>
                <cntemail>gschwarz@usgs.gov</cntemail>
                <hours>9:00am-5:00pm EST</hours>
                <cntinst>Please contact thru email</cntinst>
            </cntinfo>
        </distrib>
        <distliab>CONTACT USGS </distliab>
        <stdorder>
            <ordering>Contact USGS</ordering>
        </stdorder>
        <availabl>
            <timeinfo>
                <sngdate>
                    <caldate>1994</caldate>
                </sngdate>
            </timeinfo>
        </availabl>
    </distinfo>
    <distInfo>
        <distributor>
            <distorTran>
                <onLineSrc>
                    <orDesc Sync="TRUE">002</orDesc>
                    <linkage Sync="FALSE">withheld</linkage>
                </onLineSrc>
            </distorTran>
            <distorFormat>
                <formatName Sync="FALSE">Feature Class</formatName>
            </distorFormat>
        </distributor>
        <distFormat>
            <formatName Sync="FALSE">Feature Class</formatName>
        </distFormat>
    </distInfo>
    <refSysInfo>
        <RefSystem>
            <refSysID>
                <identCode Sync="TRUE" code="8826">IDTM83</identCode>
                <idCodeSpace Sync="TRUE">EPSG</idCodeSpace>
                <idVersion Sync="TRUE">9.5.1(10.8.0)</idVersion>
            </refSysID>
        </RefSystem>
    </refSysInfo>
    <spatRepInfo>
        <VectSpatRep>
            <geometObjs Name="Statsgo">
                <geoObjTyp>
                    <GeoObjTypCd Sync="TRUE" value="002"/>
                </geoObjTyp>
                <geoObjCnt Sync="TRUE">2000</geoObjCnt>
            </geometObjs>
            <topLvl>
                <TopoLevCd Sync="TRUE" value="001"/>
            </topLvl>
        </VectSpatRep>
    </spatRepInfo>
    <mdDateSt Sync="TRUE">20250401</mdDateSt>
    <Binary>
        <Thumbnail>
            <Data EsriPropertyType="PictureX">/9j/4AAQSkZJRgABAQEAYABgAAD/2wBDAAMCAgMCAgMDAwMEAwMEBQgFBQQEBQoHBwYIDAoMDAsK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</Data>
        </Thumbnail>
    </Binary>
</metadata>
